Skip to main content
Hero Image

LEARN HOW TO USE
CHILDREN’S FLONASE ALLERGY RELIEF

Below are a few quick how-to steps to follow that will ensure your child gets the most from Children’s FLONASE.

HOW TO OPEN CHILDREN’S FLONASE

  • Read Transcript

    VO:

    The first time you open Children's FLONASE Allergy Relief, you may be surprised by how well-sealed its packaging is.

    We designed our tamper-resistant plastic package with your best interests in mind, to maintain package integrity yet allow full view of the product.

    To easily open the package, all you need is a pair of scissors.

    ON SCREEN SUPER: Parents are encouraged to open the package for their child.

    Look for the scissors icon in the top right corner of the pack

    Then cut along the top of the package up the side, and then along the bottom. Handle carefully because the edges can be sharp

    Now it’s easy to remove the Children's FLONASE bottle and the instructions for use. 

    And don’t forget, the rest of the packaging can be recycled.

HOW CHILDREN USE CHILDREN’S FLONASE

  • Read Transcript

    VO:

    It’s easy to use Children’s FLONASE Allergy Relief. Just follow these simple steps so your child gets the most from each spray.

    First, shake the bottle gently.

    Then, remove the green cap.

    If it’s the first time you’re using a new bottle, or you’ve just cleaned the nozzle or if you haven’t used it in a week or more, you’ll need to prime the nozzle. Here’s how.

    First, aim the bottle away from your face.

    Grasp the spray bottle like this.

    Then pump until a fine mist appears. That’s how you’ll know the bottle is primed for use. If you pump six times and no mist appears, the spray nozzle may be clogged and needs to be cleaned.

    Before using Children’s FLONASE, blow your nose gently to clear your nostrils.

    Now, close one nostril and place just the tip of the spray nozzle in your other nostril.

    Be sure to aim slightly away from the center of their nose.

    Be careful not to spray into your eyes. Children’s FLONASE is only to be used in the nose.

    ON SCREEN SUPER: WARNING Do not spray in your eyes.

    Sniff gently as you press down on the spray nozzle. You’ll feel a light mist in your nose.

    Then, breathe out through your mouth.

    Now, repeat in the other nostril. Then wipe the spray nozzle with a clean tissue and replace the cap. Easy!

HOW TO ADMINISTER CHILDREN’S FLONASE

  • Read Transcript

    VO:

    It’s easy to use Children’s FLONASE Allergy Relief.

    First, shake the bottle gently.

    Then, remove the green cap.

    If it’s the first time you’re using a new bottle, or you just cleaned the nozzle, or you haven’t used it in a week or more, you’ll need to prime the nozzle. Here’s how.

    First, aim the bottle away from you and your child’s face.

    Grasp the spray bottle like this. 

    Then pump until a fine mist appears. That’s how you’ll know the bottle is primed for use. If you pump six times and no mist appears, the spray nozzle may be clogged and needs to be cleaned.

    Before using Children’s FLONASE, have your child blow their nose gently to clear their nostrils.

    Now, have your child look down like they’re reading a book. Close one nostril and place just the tip of the spray nozzle in your child’s other nostril.

    Be sure to aim slightly away from the center of their nose.

    Be careful not to spray into their eyes. Children’s FLONASE is only to be used in the nose.

    ON SCREEN SUPER: WARNING Do not spray in your eyes.

    While having your child sniff in gently, press down on the spray nozzle once. 

    They should feel a light mist in their nose.

    Have your child breathe out through their mouth.

    Now, repeat in the other nostril. Then wipe the spray nozzle with a clean tissue and replace the cap. Easy!

HOW TO CLEAN CHILDREN’S FLONASE

  • Read Transcript

    VO:

    A clean spray nozzle helps ensure a full dose. Clean the nozzle weekly, or any time it gets clogged. Never try to unblock it with a pin or sharp object—that can damage it.

    To clean the spray nozzle, first remove it by grasping the base and pulling up.

    Next, rinse the nozzle under a running tap and dry it at room temperature.

    Once it’s dry, aim the nozzle away from your face and gently replace the spray nozzle until you hear a soft click.

    If you find the spray nozzle is still clogged, simply soak it in warm water.

    Then repeat steps 2 and 3: rinse, dry and replace the nozzle, and try again.

    ON SCREEN SUPER:

    Any time you clean the nozzle, you’ll need to prepare it for use by priming it, just the way you did the first time you used the bottle. To prime the nozzle, first aim the bottle away from your face.

    Grasp the spray bottle like this. Then pump until fine mist appears.